Showing posts with label Tips. Show all posts
Showing posts with label Tips. Show all posts

Saturday, January 5, 2013

How to Save a Wet iPhone or iPod Touch


A Lesson Learned the Hard Way

Like anyone with a modicum of sanity living in the arid desert of Phoenix Arizona, I own a swimming pool. I also own an iPod Touch. You can see where this is going. One day, as I was diligently brushing the walls of my pool, a friend stopped by. Being the polite guy that I am, I turned my back to the pool to engage in discussion.
The problem of course with turning your back on a swimming pool is that you forget that it’s there, which means when you take a step back, your friend has cause to roll on the ground with laughter as you fall helplessly through the air in slow motion with one thought on your mind: My iPod is in my pocket! Splash.
I was drenched, completely submerged. As I scrambled out of the water I handed my phone to my friend to dry off, he managed to suppress his laughter for long enough to comply. At this point, we have an all too familiar situation on our hands. This is no mere $20 mp3 player. This is a significant purchase that has possibly seen its last Words With Friends session.
In this situation there is a right and wrong way to react. Before we get into the steps that you should take, let’s look at one important thing not to do!

Don’t Turn Your Device On

This may sound like an obvious piece of advice, but trust me, it’s not. In fact, when as I climbed out of the pool having already handed my iPod to my friend, I found that this is exactly what he did. He quickly dried off the outside of the device with his shirt and then naturally wanted to see if everything still worked and tried to use it.
This is a fantastic way to fry your device permanently. Granted, it’s likely already on standby and not truly off, but you’re still only going to heighten the risk of permanent damage if you try to increase the electronic activity.
Fortunately, in the end, this action didn’t spell disaster for my iPod Touch, but you might not be so lucky.

Drying Out the Device

As soon as you recover your device from its watery grave, the first step is to get all of the water out that you can. This goes beyond wiping the device off to even gently shaking it to try to free any trapped water inside.

Be Wary of Heat

From here one of the most common ideas is to grab a hair dryer. The problem with this method is that you can do as much damage as you repair. We know that water and electronics don’t mix, but it turns out heat and electronics have a similar relationship.
I’ve talked to and read about people that have successfully saved their iOS devices with a hairdryer, so it can in fact work. However, I don’t recommend it. If you’re convinced that this is the way to go, just be sure to use a low heat setting and take frequent breaks to allow the sensitive components in the phone to cool down.

Silica Packets: Do Not Eat!

You know those packets that come in everything from shirt pockets to guitar cases? These handy little guys are always equipped with a life-saving warning: “Do not eat!” This message doesn’t really help us in this situation but the packets are actually quite useful. As you know, they’re designed to absorb moisture, which means they offer a great method for sucking the water out of your wet device.
screenshot
Silica packets are awesome for saving wet electronics
What you want to do is fill a plastic bag or tupperware container with silica packets like in the image above and then toss in your iPhone. Next, seal the container and let it sit for a lot longer that you want it to. At the very least, let it go over night. If you’re cautious, 24-48 hours is a safer bet.
During this time, resist the urge to take your phone out and turn it on to see what happens. There will still be some condensation hanging around inside and you therefore have the same circuit frying risk as before. Patience is the key!

Rice: A More Practical Solution

In theory, a bag full of silica packets is awesome, but who really has twenty of those things lying around? If I tear my house completely apart I might be able to find two if I’m having a really lucky day.
When my iPod Touch went for a dip, I was too busy being angry at myself to fix the thing. Luckily, my wife jumped in and took over the situation. Being the resourceful woman that she is, she put my iPhone in a bag and filled it with rice. I was born with an overactive sense of skepticism so I saw my wife’s actions as pure nonsense and started planning my trip to the Apple Store for a replacement.
screenshot
Rice is a great substitute for silica packets
It turns out though that my wife’s black magic is actually a fairly common practice with wet electronics. The rice acts exactly like the silica packets and absorbs the moisture. In fact, this trick worked like a charm and in 24 hours I threw my iPod on a charger and it came to life. That was well over a year ago and the device still works!
The reason that rice is a less ideal solution than the packets is that it’s much messier. Rice might take the water out of your device, but it can fill it with dust. Still, unless you’re a strange hoarder who happens to have mounds of silica, rice can be a very effective solution.

Conclusion

To sum up, as soon as your iPhone gets wet, resist the urge to turn it on. Next, dry it off as best as you can, avoid heating it up unnecessarily and reach for the silica packets. If you don’t have any, fill a bag with rice, throw in your iPhone and seal it for around 24 hours.
Despite many stories of successful revivals, you’ll likely find that an iPhone that has been completely submerged in water will never be quite the same. Even if it still works, there will be noticeable quirks in how the responsiveness of the buttons, the audio quality, how well it takes a charge, etc. Ultimately, if you didn’t kill it, you’ve definitely brought it much closer to death than it was before.
It’s important to note that Apple has sensors in place that can tell if your phone has gotten wet, so don’t stroll into the Apple Store and claim that the thing just stopped working unexpectedly. Be honest and tell them what happened. You probably won’t get a free phone but Apple should offer you a discounted replacement (often refurbished).
If you’ve ever gotten your iPhone or iPod wet, tell us your story below. What method did you use to dry it out? Would you recommend that to others? Did Apple work with you on getting a replacement? We want to know!

How to End Task or Force Quit an iPhone Application

These are instructions on how to end task or force quit an iPhone application on iPhone OS 3.0.

You may need to do this if an application has stopped responding or is experience other issues.

Step One
Make sure the application that you would like to force quit is open.

Step Two
Press and hold the Power button until the power slider appears.


Step Three
Press and hold the Home button until the application is forcefully closed.


Step Four
You may now relaunch the application if so desired.

How to Find Your iPhone ECID [Mac]

These are instructions on how to find the ECID of your iPhone using a Mac.


Step One
Put your iPhone into recovery mode. If you do not know how to do this then you can follow this tutorial.

Step Two
Click to select About This Mac from the Apple menu at the top left of your screen.


Step Three
Click the More Info... button from the window that appears.


Step Four
System Profiler will open. Select USB from the Hardware menu at the left.


Select Apple Mobile Device (Recovery Mode from the USB Device tree in the top right panel.


Step Five
Copy (highlight and press Command+c) your ECID from the Serial Number field.

How to Find Your iPhone ECID [Windows]

Instructions on how to get your iPhone ECID using Windows.


Step One
Put your iPhone into recovery mode. If you do not know how to do this then you can follow this tutorial.

Step Two
Launch the USBView application. If you do not already have this application you can download it here. It is a small free utility provided by Microsoft.




Step Three
Click to select Config Discriptors from the Options menu.


Step Four
Click to select Refresh from the File Menu.


Step Five
Select the Apple Recovery (iBoot) device from the USB Device Tree in the left panel then Copy (highlight and press Control+c) your ECID from the Descriptor fields on the right.

How to Check the Bootrom Version of Your iPhone (Mac)

These are instructions on how to determine the bootrom version of your iPhone using Mac OS X.

Step One
Connect your iPhone to the computer and put it into DFU mode. If you don't know how to do this you can find instructions here.

Step Two
Click to select About This Mac from the Apple menu at the top left of your screen.


Step Three
Click the More Info... button from the About This Mac window.


Step Four
Click to select USB from the list of Hardware Contents on the left side of the screen.


Step Five
Click to select Apple Mobile Device (DFU Mode) from the USB Device Tree.


Step Six
Use the details pane, locate the Serial Number field and at the end you will see your bootrom version. It will look something like [iBoot-359.3]



***If you have an iPhone 3GS, iBoot-359.3 is considered the old bootrom. iBoot-359.3.2 is considered the new bootrom.

How to Check the Bootrom Version of Your iPhone (Windows)

These are instructions on how to determine the bootrom version of your iPhone using Windows.

Step One
Connect your iPhone to the computer and put it into DFU mode. If you don't know how to do this you can find instructions here.

Step Two
Press to launch Control Panel from your Start Menu.


Step Three
Press to select Hardware and Sound from your Control Panel window.


Step Four
Press to select Device Manager from the Hardware and Sound window.


Step Five
Double click to expand the Universal Serial Bus Controllers category


Step Six
Right click the Apple Mobile Device USB Driver item and click the Properties button.


Step Seven
Click to select the Details tab.


Step Eight
Select Device Instance Path from the Properties dropdown.


Step Nine
Scroll to the end of the field to locate your bootrom version. It should look something like [iBoot-359.3]



***If you have an iPhone 3GS, iBoot-359.3 is considered the old bootrom. iBoot-359.3.2 is considered the new bootrom.

How to Check the Bootrom Version of Your iPhone (Windows)

These are instructions on how to determine the bootrom version of your iPhone using Windows.

Step One
Connect your iPhone to the computer and put it into DFU mode. If you don't know how to do this you can find instructions here.

Step Two
Press to launch Control Panel from your Start Menu.


Step Three
Press to select Hardware and Sound from your Control Panel window.


Step Four
Press to select Device Manager from the Hardware and Sound window.


Step Five
Double click to expand the Universal Serial Bus Controllers category


Step Six
Right click the Apple Mobile Device USB Driver item and click the Properties button.


Step Seven
Click to select the Details tab.


Step Eight
Select Device Instance Path from the Properties dropdown.


Step Nine
Scroll to the end of the field to locate your bootrom version. It should look something like [iBoot-359.3]



***If you have an iPhone 3GS, iBoot-359.3 is considered the old bootrom. iBoot-359.3.2 is considered the new bootrom.

How to Sync Google Contacts to iOS Using CardDAV

These are instructions on how to sync your Google Contacts to iOS using CardDAV.

Step One
Tap to open the Settings application on your device.


Step Two
Choose Mail, Contacts, Calendars from the Settings menu.


Step Three
Select Add Account... from the Mail, Contacts, Calendars menu.


Step Four
Tap to choose Other from the Add Account page.


Step Five
Press to select the Add CardDAV Account option.


Step Six
Fill out the form with the following information and tap Next to continue.

- Server: Enter "google.com"
- User Name: Enter your full Google Account or Google Apps email address.
- Password: Your Google Account or Google Apps password. (If you’ve enabled 2 Step verification, you’ll need to generate and enter an application specific password.)
- Description: Enter a description of the account (e.g. Google Contacts).


Step Seven
Once your account has been authenticated you can open the Contacts app and syncing will automatically begin.

How to Find the IMEI Number of Your iPhone

These are instructions to find your iPhone's IMEI number using several different methods.


ABOUT MENU:

Step One
Tap to open Settings from your Springboard.


Step Two
Press to select General from the Settings menu.


Step Three
Choose About from the General menu.


Step Four
Scroll down to find your IMEI number displayed.



DIAL:

Step One
Tap to open Phone from your Springboard.


Step Two
Press to select Keypad from the tabs at the bottom of the screen then input *#06#.


Step Three
Your IMEI number will be displayed on the screen.



BACK ENGRAVING:
Your IMEI is engraved on the back case of the original iPhone and the iPhone 5, near the bottom. The MEID number uses the first 14 digits, disregarding the last digit.



SIM CARD TRAY:
The serial number and IMEI will be printed on the SIM tray of the iPhone 3G, iPhone 3GS, iPhone 4 (GSM model), and iPhone 4S, as shown below.


When an iPhone 4S is activated on a CDMA carrier, the SIM tray displays both the MEID and the IMEI number as 15 digits. The MEID number uses the first 14 digits, disregarding the last digit, and the IMEI number uses all 15 digits.